Disconnect the old ignition coil: Depending on the lawn mower’s make and model, you may need to remove the engine cover or other parts to

Disconnect the old cable: Locate the end of the cable that is connected to the control lever or engine. Using pliers, loosen and disconnect any

Remove the old wheel: If you’re replacing an existing wheel, locate the axle nut or retaining clip securing the wheel to the axle. Use pliers

To install bushings on a lawn mower, follow these general steps: Prepare the lawn mower: Ensure the lawn mower is parked on a flat surface

Installing a new air filter in a lawn mower is a relatively straightforward process. Here are the general steps to follow: Locate the air filter

1. Start by locating the bearing/housing. This is usually found at the base of the lawn mower. 2. Remove any debris that may be in

1. Disconnect the spark plug wire from the spark plug. This is to prevent the engine from starting while you are working on it. 2.

1. Park the lawn mower on a flat, level surface. Make sure the engine is off and the spark plug wire is disconnected from the

1. Disconnect the spark plug wire from the spark plug of the lawn mower to prevent any accidental starting of the lawn mower. 2. Use

1. Locate the air filter on your lawn mower. The location of the filter depends on the model of your lawn mower. It is usually

1. To replace lawn mower bearings, you will need to first remove the blade from the lawn mower. If the blade is attached with bolts,

What are the benefits of blade brake clutch? The main benefit of blade brake clutch is that you’ll only need to start your engine once